If you are looking for parts for your:

Lynx System
click here

PowerMax System
click here

To add additional window/door transmitters select from Powermax Magnetic transmitters Up to 10 per Receiver

Repair a damaged wired zone with a wireless replacement package - works on any wired zone

• This superheterodyne UHF receiver designed for smaller systems. The MCR-304 provides a one zone (N.O./N.C.) output and three reporting outputs (tamper, low battery and inactivity). Up to ten transmitters can be assigned to the alarm output. The receiver "learns" the ID of selected transmitters and will provide visual feedback upon successful enrollment of the transmitter(s) into the system.
• The transmitter is one of the smallest wireless magnetic contacts in the industry.It features a built-in reed switch and an auxiliary hardwired input,programmable as either N.C. or N.O. with an End-of-Line (E.O.L.)resistor.

• Designed for security, alarm and control applications.
• Easily integrated into virtually any alarm control panel.
• Secure communication with transmitting device based on user-defined system code (selected from 256 possible combinations).
• 4-channel selector for maximum control flexibility.
• 11-14 Volt DC or AC power supply.

  1 - 5881 8 Zone Receiver 
  1 - 5816  Window Transmitters
  1 - 5890  Motion Detector
  1 - 5804  4button Keyfob

Used to add wireless zones to Honeywell - Ademco hardwired VISTA control panels. Remodels and additions can be added to existing wired systems, or if you can only reach part of your home with wires, do the rest wireless.

 Data Sheet (pdf)

Add a second keypad to your system and have a wireless transceiver built in.

The only product of its kind, the 6150RF keypad/receiver breaks through an industry price barrier by combining a keypad, a 5800 wireless receiver/transmitter and an on-board relay into a simple integrated product. The integrated design cuts installation time and reduces material costs. The 6150RF works with ADEMCO's full line of 5800 sensors, making the addition of wireless accessories, such as sensors, keys and keypads, quick and easy. The 6150RF takes the mystery out of wireless. With a wireless receiver/transmitter on board, installers can add remote control capabilities to any ADEMCO Wired control panel - without additional wiring or sacrificing zones.

 Up to 16 devices
 New high security mode, rolling code encryption
 Connects to console interface wires
 Longer range, dual antennas 5881

Used to add some wireless zones to Ademco hardwired control panels. Remodels and additions can be added to existing wired systems, or if you can only reach part of your home with wires, do the rest wireless.

Requires 5883H wireless transceiver when connecting to any Vista Control Panel

Wireless Bi-Directional Alpha Keypad

ADEMCO’s 5839 Wireless Alpha Keypad substantially reduces installation costs, since there are no wires to run. Now, secondary keypads can be used on any VISTA system installation where wiring is either difficult or time consuming. The 5839 provides homeowners with all of the features of a traditional hardwired keypad with an easy-to-read, 32-character display and four function keys for single-button operation.

The 5839 requires a 5883H Wireless Transceiver, which enables it to operate as a fully wireless bi-directional keypad. The 5839 is powered by a 9V battery (included), or an optional AC adaptor can be used for "always on" operation where users receive real-time status and alarms. The convenient portable design allows end-users to operate it from anywhere in the home.

5883H Wireless Transceiver

The 5883H combines a 5881ENH Receiver and a 5800TM Transmission Module, making wireless bi-directional installations faster and easier than ever before.  Since there is only one module to install, installation costs are drastically reduced.

Features:

• One module to install, saving installation costs

• One module to purchase, reducing shelf space and inventory

• Compatible with all VISTA controls and 5800 wireless products

data sheet.pdf

Wireless Repeater with Power Supply

ADEMCO’s 5800RP is a wireless repeater that extends the range of 5800 series RF devices. For installations that require increased RF range, the 5800RP eliminates the need to run wires to a remotely installed secondary receiver and also eliminates the need to upgrade to a larger control panel that supports two receivers.

• Receives alarm, status and control messages from 5800 RF devices, and repeats these messages to the control panel via the primary receiver
• Compatible with all 5800 wireless devices (including bi-directional devices)
• UL residential burglary listed
• AC powered with a six-hour battery back up
• Tamper protected

Two-zone 'two way' transmitter
Features a built-in reed switch and tamper
Includes lithium battery
External contact loop
Dimensions: 3-1/16"H x 1-9/16"W x 1-3/16"D

Transmitter: 13/16" Diameter, 4-7/8" Long Magnet: 1/2" Diameter, 1-3/4"

Honeywell’s Wireless Glassbreak Detector offers uncompromised performance and unmatched false alarm immunity. The FlexCore^TM signal processor utilizes an Application Specific Integrated Circuit (ASIC) - processing sound data in parallel rather than sequentially. This permits sound frequency, duration and amplitude to be analyzed 50% faster to minimize false alarms while maintaining the highest possible level of detection.

The 5853 can be mounted on any wall or ceiling within a 25’ range, with no minimum range limitation. The LEDs indicate test mode, alarms and trouble conditions. It is compatible with all 5800 series wireless devices.

• Four selectable sensitivity settings (Max, Medium, Low and Lowest)
• Senses the sound of variety of glass (tampered, wired, laminate, ordinary plate, etc.)

35' x 45' (10.6m x 13.7m) coverage pattern
Immune to pets up to 40 lbs.
Split-Zone Optics technology
For use with Q.E.D. control panels only
Includes 2 lithium batteries with up to 5 year battery life

5804BD

data sheet .pdf