|
Top of the Line

Data Sheet (pdf)
Scroll down for additional Lynx
sensors |
HoneyWell - Ademco Lynx Fully Wireless
Alarm
With its uncompromising technology
and reliability, the new LYNXR-EN Security Alarm System is as easy to install as it is to use. The
exciting new voice prompt programming feature walks you through the installation
process, letting you install the system with little or no training.
The all-in-one
integrated design gives you installation flexibility for every job with the
proven reliability of Honeywell's powerful technology. Designed for a quick
install, LYNXR-EN is a security control panel, alarm keypad, siren, dialer, two-way voice
system and speakerphone in one sleek unit. It supports all honeywell 5800 wireless
alarm devices
and security sensors.
Kit Includes
1 - Base Station
with built-in alarm keypad and siren
2 - window/door
wireless mini alarm contacts
1 - wireless pet-smart security motion detector
Transformer and Alarm Battery
backup
|
$375.75
|
|
|
Data Sheet (pdf)

Put a second keypad in your system
located anywhere..
|
Fully Wireless Fixed English Alarm Keypad
A perfect add-on to any LYNX, VISTA or LXL system, the 5828 wireless alarm keypad
saves dealers valuable time by offering the quickest, easiest installation of a
secondary keypad. The 5828 is easy and inexpensive to install, with no wires to
run. It mounts anywhere—on walls, tabletops and counters—and provides the
flexibility and convenience of operating the system from anywhere in the home.
Vista Hardwired Alarm Controls require 6160RF keypad
in the system. |
$107.75
|
|
|

Magnets Not
Included
|
Ademco
Wireless Window/Door Transmitter
Two-zone 'two way' alarm transmitter
Features a built-in reed switch and tamper
Includes lithium battery
External contact loop
Dimensions: 3-1/16"H x 1-9/16"W x 1-3/16"D
|
$49.95
|
|
|

|
Magnets only for Wireless
Window/Door Transmitter
5 Pack of Magnets that
are needed for Window/Door Transmitters |
$15.95
|
|
|

|
Ademco Recessed Door Transmitter
Features a tapered cylinder for flush fit
Includes self-contained transmitter, reed sensor, lithium battery & recessed
magnet
Features a standard white plastic case
Use 7/8" drill bit for transmitter
Use 1/2" drill bit for magnet
Transmitter: 13/16" Diameter,
4-7/8" Long
Magnet:
1/2" Diameter, 1-3/4"
|
$49.95
|
|
|

|
Wireless Glassbreak Alarm Detector
Honeywell’s Wireless
Glassbreak Alarm Detector offers uncompromised performance and unmatched false alarm
immunity. The FlexCoreTM signal
processor utilizes an Application Specific Integrated Circuit (ASIC) -
processing sound data in parallel rather than sequentially. This permits sound
frequency, duration and amplitude to be analyzed 50% faster to minimize false
alarms while maintaining the highest possible level of detection.
The 5853 can be mounted on any
wall or ceiling within a 25’ range, with no minimum range limitation. The LEDs
indicate test mode, alarms and trouble conditions. It is compatible with all
5800 series wireless devices.
- Four selectable
sensitivity settings (Max, Medium, Low and Lowest)
- Senses the sound of variety of glass (tampered,
wired, laminate, ordinary plate, etc.)
|
$99.95
|
|
|

|
Ademco Wireless PIR
motion detector with pet immunity
35' x 45' (10.6m x 13.7m) coverage pattern
Immune to pets up to 40 lbs.
Split-Zone Optics technology
For use with Q.E.D. control panels only
Includes 2 lithium batteries with up to 5 year battery life
|
$139.95
|
|
|

|
Ademco Wireless
Alarm Smoke & Heat Detector
The 5808LST residential smoke and heat detector has built-in
wireless transmitters. Great for difficult to wire locations such as cathedral
ceilings and where there is asbestos above a drop ceiling. No holes to drill and
the low profile design "disappears" after installation.
Compatible with 5881 series wireless receivers
and able to send alarm, tamper, low battery and maintenance messages. A flashing
LED may indicate that the photoelectric chamber needs cleaning or that the
detector is unable to respond to smoke and needs replacement.
|
$119.95
|
|
|

|
Ademco
Wireless 4But Keyfob
Arm or disarm
your Lynx Security Alarm or send it a panic alarm from outside your entry door. New high security mode, rolling code encryption
4 programmable buttons, user replaceable battery
|
$67.50
|
|
|
data sheet .pdf
|
Honeywell-Ademco Lynx
Wireless Alarm Siren Honeywell’s 5800WAVE is a fully
wireless siren that provides periodic status information and battery back up for
an added level of performance and protection. The flexible design simplifies
installation, saves time and installs in seconds at any location without the
need to run wires. System status is shown on the 5800WAVE with three LED’s
directly on the front of the unit.
Features:
- Siren output level is 95 dB at three feet
- Transmits module status, including mounting tamper, low battery and AC
loss to the control panel
- LED; show system status of the device
- AC powered with a rechargeable 12 hour battery backup
- Plugs in to any standard duplex receptacle and installs in seconds
- Provides temporal pulse sounding for fire alarms
- Lowers labor costs and saves time
- Simplifies installation
- Compatible with LYNXR (Rev 10 or higher) and VISTA controls that support
the 5883 transceiver
|
$117.75
|
|
|

|
Honeywell-Ademco Lynx
Desk Mount Convenient base for the Lynx wireless system. No drilling into
walls to hang the base station. Great for Desk or Counter Tops.
|
$15.75
|
|
|
|
|
 |